Rewmar MS Polymer Wood Flooring Adhesive (15kg)

each
Bulk Buy Discount
£87.84
In stock
SKU
Rewmar MS Polymer Adhesive (15kg)
  • Available for Next Day Delivery
  • FREE Delivery when you spend over £90

Delivery Update: Please note that due to the Nationwide Tier 5 Lockdown restrictions all courier networks
experiencing mild delays.
 

Delivery Update: Please note that due to the Nationwide Tier 5 Lockdown restrictions all courier networks
experiencing mild delays.
 

Rewmar MS Polymer Adhesive (15kg)

Rewmar MS Polymer Adhesive is a flexible flooring adhesive that is suitable for the installation of any wooden floor, it is a solvent and waterfree, universal, ready to use elastic wood flooring adhesive. Suitable for bonding many kinds of parquet and wooden floors onto suitable substrates indoor.

Technical Information:

  • Consistency: Paste
  • Colour: Pale Brown or Dark Brown
  • Specific gravity: Approx. 1.6
  • Brookfield viscosity (mPas): Approx. 72.000 (HBT A/10)
  • Open Time: 20-30 minutes (This can vary according to environmental circumstances such as temperature, humidity, substrate etc)
  • Coverage: Approx.15m² (1m² per kg of adhesive)

 

Application:

Remwar MS Polymer Adhesive should be brought to room temperature before installation. Apply the adhesive by means of a suitable notched trowel to the surface (either 3mm or 6mm V notched). Do not apply more to the surface that can be covered with parquet within 20 minutes. Slide the wood flooring onto the adhesive layer and tap into place or tamp down with a rubber hammer. Ensure the adhesive is in contact with the parquet. A minimum of 80% contact is required. Loading the wood flooring with weights will improve the final bond strength. Wait at least 12 hours before sanding and finishing the parquet. Uncured MS wood flooring adhesive may be removed from tools and parquet with adhesive cleaner. Cured adhesive must be removed mechanically.

Precautions:

Apply the usual industrial hygiene precautions. Solvent free and non flammable. Avoid contact with the eyes and skin and always use in a well ventilated room. Wear protective gloves and goggles and in the event of contact with the skin rinse well with soap and water. In the event of contact with the eyes, rinse with water and consult a doctor immediately. Always take care to follow the container labelling and the product data sheet.

Tools:

Apply with a 3mm x 6mm ‘V’ notched trowel.

Storage:

Store between 5ºC and 25°C in accordance with current regulations for highly flammable liquids.

Shelf Life:

12 months in unopened packaging in a cool and dry storage place.

Follow us on Facebook :
Follow us on Twitter :
Follow us on Linkedin :
Follow us on Instagram :
  • MON-THU: 09:00 - 17:00
  • FRI: 09:00 - 13:00
  • 020 8037 9300